Identify any Difficulties Encountered in Supporting the Learning Activities Essay Example

Identify any Difficulties Encountered in Supporting the Learning Activities Paper Describe the Sorts of Problems that Might Occur when Supporting Learning Activities and How to Deal with These Unorganised planning: If a lesson has not had the appropriate amount of planning or if the staff that are involved in the activity are not aware of their role and what is expected it can cause confusion during the lesson meaning it will not flow and the children will have disturb learning. To prevent this it is important that all member of the team are aware of the activity what is going to happen and what level of support nd assistance they are expected to provide. This should be done before the children are in the classroom and before they start the learning activity. Insufficient resources: The majority of activities set by the teacher will require the use of multiple resources for example exercise books, pencils, crayons, scissors, glue, rulers ect. Sometimes, unfortunately there are not always enough resources available for every student which results in a delay in the start of work, due to trying to locate the supplies. To help deal with and prevent this from happening the esources should be located and prepared before the lesson begins ensuring there is enough for the class. We will write a custom essay sample on Identify any Difficulties Encountered in Supporting the Learning Activities specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Identify any Difficulties Encountered in Supporting the Learning Activities specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Identify any Difficulties Encountered in Supporting the Learning Activities specifically for you FOR ONLY $16.38 $13.9/page Hire Writer Where this is not possible it is important to organise the resourses you do have to enable you to share them out equally and encourage the children to share with a partner whenever possible. Noise: Classrooms can often become a very noisy environment when children are learning and working in groups or individually. This can be a huge distraction for children and prevent them from producing the best work they can and also slow their work pace resulting in unfinished work. To help combat this it is important to remind the children at regular intervals that they should keep there voices to a whisper and raise their hand rather than shout out. Also having a way to get the whole classes attention when they are being far too noisy for example in my setting the teacher would say 1 2 3 and the children would be expected to put down anything they were doing, look at the teacher and reply look at me this would make it easier to know that the teacher had the full attention of all the children when needed. Also outside noise can cause a distraction, for example noise from a eighbouring classroom or hallway a way to help stop this noise always make sure the door is shut during lesson times to minimise disruption. . Wide spectrum of abilities: Having a inclusive class with a wide range of children and abilities could also cause a problem when supporting learning activities, has been set. This can be dealt with by splitting the children in to ability based groups and providing the appropriate work for each group and setting achievable targets. By encouraging the higher ability children to help those struggling will help keep the clas s working at a similar pace. Shy students: Some children may suffer with confidence issues which may affect their individual work and contribution to the class as they are worried they may get answers wrong and getting told off. To combat this you must build a good rapport and relationship with your students and let them know its 0k to be wrong. In my setting we had posters around the classroom made by the children with classroom rules and behaviours, one of them being: Its safe to make mistakes. Build up trust with particularly shy students and encourage them to come out of their shell and ive praise when they try. Students with English as second language: Sometimes a class may have a bilingual student where English is not their mother tongue. This student may need extra support to understand the meaning of words or what is expected of them. If they are particularly bad at English you could provide things such as flash cards and labels on items to help them learn. You could also encourage some more extrovert, friendly, wise students to befriend them to help with their language. Lack of learning motivation and low levels of attention: It may cause problems if ne or more of class have a short attention span and/or lack of motivation to learn. Help to prevent this by make lessons interesting relevant; increase student involvement interaction. Include multiple sources of learning multi-sensory, practicals, field trips, hands on, project work, activities. One or more highly disruptive student :Find out the real reason for such indiscipline and try to sort that out. eg. if the child is a genius, and so causes disruption because of bordom and is way ahead of the class, then provide him/her with work/activity on the side, suited to his/her level.

2 Minute Presentation Topics on Modern Architecture

2 Minute Presentation Topics on Modern Architecture 2 Minute Presentation Topics on Modern Architecture If you are tasked with giving a presentation on modern architecture, you have the unique opportunity to introduce a not well known aspect of buildings and their history. While 2 minutes are not that long, it is still long enough to give your classmates an introduction to one aspect of architecture you might find fascinating. If you are in need of 2 minute presentation topics on modern architecture then consider the list of 20 topics below: How Social Housing Architecture Is Changing Urban Redevelopment: Architectural Assessments and Change The Role Played by the Church of England in Maintaining National Architecture Preserving National Heritage: How Modern Architecture Must Remake Historic Buildings Global Cultural Spaces: How Architecture Reflects Identity Sustained Buildings: Combining Nature and Architecture University Architecture and Design: The Search for Modern Perfection The Rich Decoration of Venetian Style Architecture Victorian-Edwardian Styles of Modern Architecture What Changing Architectural Styles Tell about the Civic Pride in Modern Architecture The Political Aesthetic of Foster’s Dome The Americanization of British Urban Architecture Reinventing Civic Design with Modern Architecture Environmentally Friendly Architecture: How Modern Utilities Have Changed Architectural Standards Clean Lines Creating Challenges for Modern Maintenance The Influence of Islam on the Architecture of Turkey: How Changing Rulers Changed the Construction The Influence of Christianity on Architecture: The Incorporation of Religious Artwork on Public Buildings The Geometric Shapes Used in Islamic Construction: How Interior Designs Reflect Internal Beliefs The Decline of Modern Architecture How Architecture Expresses More than Structure: The Historical Lessons Hidden in Each Building The first thing you must note is that nearly all academic writing is opinionated to some degree, meaning that no matter what you are writing, your goal is to present your opinion, often supported with facts. That being said, when writing on this particular topic, your goal is to present enough facts to support your point of view. Once you have a topic, you must start writing out the key points you want to cover. By writing a short draft or outline the same as you would do in an essay, you can review what you have and time your speech before you stand up in front of the class. Editing is important, but you should not rush it. Start at least 24 hours after you produce your first draft. In addition to this you want to make sure that your sentences flow smoothly and all of your thoughts or ideas are properly connected. You want to finally look over everything for spelling or grammar mistakes. Print out a copy too! Reading it out loud gives you the opportunity to catch smaller errors that might have gone otherwise unnoticed. Having the red pen with you allows you to write down immediately what areas need to be fixed so that once you are done, you can go back and make any necessary changes before printing out your final copy. Our professional custom writing company is a good PowerPoint presentation maker  available for students. All you need is to place your order at our website.

Cultural identity of european americans in the southwest Essay

Cultural identity of european americans in the southwest - Essay Example Cultural identity refers to the background of a person. In this case, originality of the person plays a very big role in defining the culture of this person. It is defined by various foundation factors in the life of a person such as language, religion, the food they eat. Culture also encompasses beliefs and moral values, traditions and laws that define a given community, country or a given group in a given area. Cultural diversity may also be very varied in a region with high levels of immigration or emigration. Cultural diversity may also be very varied in a region with high levels of immigration or emigration. This paper seeks to discuss the cultural identity of a European American male in the southwest and how this identity affects the personal and professional aspect of this person. In light of the same, the discussion will address how a European American defines culture in the broader perspective where race, ethnicity, heritage, history, family and environment are concerned, as well as how these aspects affect the professional behaviors and attitudes. Definition of Aspects of Culture In View Of a European American Race and Environment The development of the Euro-American identity is related to the prior development of interaction between this European race and the settled areas. The identities that were adapted were based on an already adapted society in the southwest. The identity of this race took several other forms as opposed to the single and uniform race that defines other races like the blacks (Kirk, 2007). It was alright to refer to them as white Americans, Caucasian Americans and their common region of habitation is the Anglo-American region (actually the South Western region). The South West is a multi-racial, multi-cultural community and therefore has a very wide collection of people. The Euro-Americans came from all over Europe and in meeting the other races from different parts of the world there has always been a bias in the social co-ordina tion of issues. Given that all the Euro-Americans were white, there was a serious bias when it came to co-operation with the other races. For instance, there was a race riot in 1919 in Chicago which was believed to have been initiated by Irish Americans on the black community. The Ragen Colts, a gang that existed in Chicago at the time tirelessly planned blackmails to try and draw the attention of all the white community against the blacks. In essence, the most important set of elements that exists between these interfaces are coiled towards bringing the idea of isolation of other races by the Euro-Americans. The definition of race as a part of culture by the Euro-Americans is therefore based on several aspects of socialization. According to Smith (2007), the whites, more so the Euro-Americans get socialized into an already polluted society and therefore inherit stereotypes, behaviors and beliefs of the extended society. There is also a belief that racism is normal and much integrat ed into the society permeating all across our sociological institutions (Eschbach & Gomez, 1998). In fact, the creation of an individual in this society is based on the existing sequences which are believed to exist in both permeated and non-permeated sets of societies. The conclusive remarks on the identity of the whites on racial issues are based on the idea of having an identity based on racial issues but living purely in a non-racial formation in the same society. Wozab (2010) redefines the general view that race as defined by the Helm’s model depicts these Euro-American whites as being of some kind of superior identity. The different identities are engulfed in the type of environment developed during the development of young children in that society. The family, schools, the social media and the church form an

Security proposal for college Coursework Example | Topics and Well Written Essays - 1250 words

Security proposal for college - Coursework Example We have also demonstrated our capability to fulfill these needs. We look forward to an opportunity to discuss this proposal and answer any questions that may arise. Thank you in advance. Sierra Joint Community College Security Needs Assessment After an appraisal of the current state of your security system, Gibraltar Security Firm has identified the following as the most pressing areas that need to be addressed: 1. There is a need for an emergency security management system in the college. As of now, there is lack of properly demarcated assembly points, emergency communication systems and emergency preparedness personnel. 2. Streamlining of responsibilities in inventory is necessary in several of your departments. There is lack of traceability in the laboratory and the general stores department due to overlap of duties and lack of clear restrictions as to who has access to which aspects of the department. This creates a possibility of pilferage that may be untraceable. 3. The distrib ution of security lights within the college needs to be addressed. Whereas some sections of the college are well lit including the administration blocks and laboratories and lecture halls, other critical areas such as the student hostels, parking lot, the perimeter fence and infrequently used roads bear poor lighting. 4. The distribution of the existing security personnel is wanting. ... Currently, the security cameras in the college serve only the administration blocks and the finance department which leaves room for security breach in several other critical areas especially while appreciating the fact that the college is considerably sizeable and filled with infrastructure and facilities. 6. The library is in need of a modernized security system. Currently, security personnel bear the responsibility of ensuring that only borrowed material gets out of the library. Through a complete overhaul and implementing barcodes on books and detectors at the library entrance, library resources will be secured adequately. 7. There is need for an intrusion detection system serving the most critical areas of the college. Whereas the perimeter and internal fences are in a good state, there is always a possibility that they may be breached. Hence, areas such as the administration block, finance, laboratories and stores departments are in need of intrusion detection devices. Out of t his analysis, the threat probability ranking for your college is 2 (1: Frequent, 2: Probable, 3: Occasional, 4: Remote, 5: Improbable). Thus, there is a clear and urgent need to address these issues and implement a proper security system at Sierra Joint Community College Security. Proposed Action Plan The goal of the proposed action plan is to improve the probability ranking of the college to 4. The objectives that will guide the proposed plan towards the set goal are as follows: 1. To provide a security system that assures all members of the Sierra Joint Community College Security community a sense of security. 2. To establish a system composed of security personnel integrated appropriately in the overall operation to maximize

Epicurus' View On Death Essay Example | Topics and Well Written Essays - 1250 words

Epicurus' View On Death - Essay Example The second view has its roots in religion and has far-reaching implications for understanding the meaning of death. This view does not accept death as the way of getting rid of tortures and life difficulties (Belshaw 2009). Based on this view, individuals should keep living, no matter how difficult their lives can be (Belshaw, 2009). In happiness and troubles, life is the greatest value that needs to be preserved and continued by all possible means. This view also implies that, no matter how difficult one’s life can be, there is also some room for making improvements (Belshaw 2009). The third view on death reduces the scope of badness in death but does not eliminate it. Simply stated, proponents of the third view realize that, at times, death may appear to be a preferable alternative to life (Belshaw 2009). Depending on the circumstances, life can be better or worse than death but, nevertheless, it is remains inherently bad (Belshaw 2009). It is no wonder that the prevailing m ajority of people associate death with sadness, loss, grief, and eternal separation with those who leave the world of the living and enter the world of the dead. Is it that death is as bad as many people believe it to be? Isn’t it possible to change public perceptions of death and realize that, even if death is not good, it may not be bad? Epicurus’ views on death hold a promise to clarify the situation. Despite the contribution made by Epicurus to the evolution of philosophy, his legacy in the study of death is persistently disregarded. Epicurus’ view on death is found in Letter to Menoeceus: â€Å"Accustom thyself to believe that death is... This essay describes Epicurus and his views on death. He used to be one of the most popular philosophers whose contribution to the meaning of death was persistently disregarded. Death is the topic that surrounded by considerable philosophic controversies even in modern society. According to Epicurus and his philosophical views, death is neither pleasant nor painful. Therefore, based on this premise, death cannot be bad. The researcher suggests that Epicurus may be right in that death is not worth being feared of, as long as no one can escape it. It is more reasonable and rational for people to take death as something inevitable. Simultaneously, the difficulty interpreting the meaning of badness should not be dismissed and, despite its value, Epicurus’ view cannot guarantee that death is bad or horrid for everyone or that death is bad and horrid at all. The researcher also uses comparisons between Western and Eastern worlds to give better explanation on the topic. In the Wester n world, death is usually considered as an extremely bad and undesirable phenomenon. The relationship between death and badness is analyzed in the essay, it tends to be considered from three different standpoints. In conlusion, the researcher sums up Epicurean philosophy of death. It falls short from the arguments that could support or deny the criteria of badness proposed by Epicurus. Objectively, no one can know whether death is pleasurable or painless, and this is one of the major pitfalls of Epicurean death philosophy.

Novating design team to a contractor

Novating design team to a contractor Synopsis Clients within the Construction Industry prefer to use the JCT Design Build Contract rather than other traditional procurements methods. Novation is a process that allows Clients to oversee the early stages of design development of a project and then transfer the responsibility for the design to a Contractor after the contract has been awarded. By transferring the responsibility to the Contractor through novation the Client takes minimum risk contractually while retaining an influence on project design from the initial stages. This process transfers maximum risk to the Contractor as he becomes responsible for all future design of a project and all past design completed up to the point of a contract being awarded, this includes any design errors. Both Contractors and Designers must work together closely on any design and build project, but particularly when novation has taken place. For a project to be profitable and be completed on time it is essential that there is a good working relationship between Contractor and Designer. Research to establish if the process of novation has an adverse affect on the working relationship between Contractor and Designer was conducted. The aims were to identify factors that may affect the working relationship of the two parties and to understand the opinions of both Contractors and Designers about what affect novation has on their working relationship. The objectives of the research were to highlight specific problems within the process of novation and recommend improvements to industry. To achieve this research in the form of a literature review, questionnaires and an interview with Contractors and a Designer was performed. The report recommendations are aimed at Clients to hold more pre-contract meetings with Contractors not just Designers, and understand the criteria a Contractor follows when appointing a Designer to ensure compatibility between parties when in Design and Build contract together. Acknowledgements I would like to express gratitude to the following people and organisations for their time, knowledge and support in assisting the in the successful completion of this research project: My final year Supervisor Dr Ron Craig of the Civil and Building Engineering Dept of Loughborough University, for constructive criticism and guidance throughout the process of developing the dissertation. HBG UK Ltd for using a lot of Commercial Managers, Design Co-ordinators, Legal Correspondents and Personnels time in completing the literature review and aiding in the data collection. The Commercial Manager of the second Contracting Company questioned The Architect questioned for his experience and opinions of the process of novation. Mr Andrew Moss for proof reading the final draft of this report and suggesting possible alterations. Chapter 1 Introduction 1.1 Introduction to Subject The Design and Build form of J.C.T contract (please see chapter 4.0) has become more popular with construction Clients that employ Contractors to construct new buildings and/or renovate existing structures. The Authors research has shown that the percentage of contracts tendered for under a Design and Build form of J.C.T has increased over the last five years. In conjunction with this the traditional form of JCT contract has decreased in popularity with Clients. In many cases the designs which make up part of the contract between the Client and Contractor, under JCT Design and Build, are completed by a Design Team on behalf of the Client before the contract between the Client and Contractor is made. To ensure that the Contractor who successfully tenders for a project retains the Design Consultant that the Client employed prior to the contract being made it is sometimes necessary for a Client to novate (please see chapter 5) the design team across to the Contractor. The purpose of this report is to investigate into the problems, if any, with the process of novating a design team to a Contractor from the Client and suggest solutions. This report will also detail the affects on the working relationship between the Contractor and the Designer, and how novation either aids or hinders the working relationship 1.1.1 Aims of Chapter One To introduce the Dissertation subject area. The reasons behind the investigation of this Dissertation. To outline the work carried out and a description of the contents of the Dissertation. Detail a well constructed hypothesis that the investigation will either prove or disprove. To outline a guide to the report, and introduce each individual chapter. To detail the aims of the report and the objective that must be achieved to meet the aims. 1.2 Rationale behind I nvestigation The interest into the investigation of Are there always problems with novating a design team to a contractor? came about after the Authors industrial placement. While working on site for a Contractor on a J.C.T. Design and Build contract where the design team was novated it became apparent to the Author that there were many differences of opinions between the Designers and the Contracting Company. The main items of debate and disagreement between the Contractor and the Design Team were the Clients requirements. In the Authors experience there was a large difference of opinion of how design changes and/or variations should be treated between the Design Team and the Contractor. Whilst profit-driven Contractor seemed to always look for the cheapest and most cost effective way of bridging any design problem; where as the Design Team gave the impression that they were more concerned about the aesthetics of the design and the Clients design opinions rather than the buildability and cost. Many design variations that were requested by the Client, or those forced upon the Contractor were not always as the Contractor had specified to the Design Team. The Contractor felt that his time was wasted by the Consultant not designing elements as originally specified. The working relationship between the Contractor and the Designer seemed to deteriorate from the project start date, until beyond the design completion stage. After the Author had asked other members within the Contracting Company about the novation of a Designer to the Contractor it became apparent that the relationship between Contractor and Designer was similarly affected on other projects. The Author had discussions with the Client of the project he was placed on. The Client stated that more building work was being undertaken using the J.C.T. Design and Build form of contract as this reduces the risk to the client and/or the person funding the project. The Author found that under Design and Build more risk was placed on the Contractor, and that management techniques had to change to appropriately manage higher risk projects. He also realised that as more contracts were being made under the Design and Build form of contract with the Designers being novated to work for the contractor a greater knowledge of the subject area would be beneficial to the Author in the management of Design and Build contracts. 1.2.1 Originality of Thought The Author had discussions with his Supervisor before commencing the research about the subject matter. A hypothesis was agreed upon that gave the Author scope to research areas of the process of novation in design and build contracting that have not previously been discussed in an undergraduates research project for the Supervisor. The process of novation being used in the design and build contract has recently become popular with Clients. The aim of the research is to establish if Contractors and Designers have not yet fully adapted to the change and improvements in the working relationship between the parties must be made to ensure that they remain competitive and profitable. 1.3 Subject Definition Novation is a process in which [1]a contract between party A and party C is turned into a new contract between party B and party C. This process can only be achieved if all three parties agree that novation can take place. A Deed of Novation[2] is commonly used to terminate a contract between parties A and B, and then create a new contract between parties A and C. There are standard legal documents, blank deeds of novation, which are available as downloads from the internet, for example at (www.citysolicitors.org.uk/legal_activities as of 28/03/06). A deed of novation has been used for many years before it became popular with Clients in the construction design and build context. It is used in the sale of manufacturing companies, where components made are used by other larger companies. For example, the purchase of a windscreen wiper company by a new owner whilst retaining the commitment to an existing customer car manufacturer. Novation has many other wider applications other than construction; Porsche in their latest brochure[3] offer a novated lease for their new motor cars. In this case an Employee of a company (the lessee) signs a lease agreement with Porsche (the lessor). A Deed of Novation, then supplied by Porsche, is signed by Porsche, the Employee and the Employer. This then transfers the responsibility for the payment to the Employer. Novation is used in a construction context where the relationship between two parties has developed over time and the introduction of a third or new party is necessary. There then needs to be provision to contractually protect the existing parties in the relationship. 1.4 Report Intention The intention of this report is to investigate how the working relationship between the Contractor and the Designer novated to the Contractor from the Client could be improved to their mutual benefit, and to the benefit of the Client. However, the report may show that there is no improvement to be made, and that the process of novation as it presently stands is adequate. 1.4.1 Aims To identify clearly factors that may affect the relationship between the Contractor and the Designer under novation To discover any adverse characteristics that may cause a poor working relationship between the Contractor and the Designer To clearly understand the opinions of Designers and Contractors that has been involved with novation To understand the attitudes of Designers and Contractors towards novation To clearly understand the definition of novation and the context in which it is used within the construction industry To identify any differences in attitudes between Contracting Companies towards novation under a J.C.T. Design and Build contract To understand why Clients now prefer to use the Design and Build form of contract rather than the Traditional contracts they favoured to use To identify why Clients within construction novate the Design Team across to the Contractor 1.4.2 Objectives To highlight specific problems within the process of novation that requires improving To investigate how the process of novation may differ between contracts and/or with varying Clients To identify differences between the Contractors and Designers opinion of novation under the J.C.T. Design and Build Contract To highlight areas within construction where it is necessary to use novation in Design and Build contracts To advise the Contracting Companies of the most economic way of managing a Design Team that has been novated by a Client To identify if a Contractor and Designer have a better working relationship, i.e. have a greater understanding of each others objectives and needs, under a traditional contract rather than novation under a Design and Build Contract 1.4.3 Hypothesis The working relationship between Contractor and Designer is adversely affected by Novation. 1.5 Overview of Research Methodology The methodology of the research for this project will take the form of the following; please see the methodology in chapter three for a detailed discussion on the report methods used: A review of past and current literature concerning the background of novation within the construction industry. A review of specific literature concerning the working relationship of a Contractor and Designer. Discuss the definition of novation within construction, and where it is most commonly used in the industry. Design a questionnaire to send out to a selected Contractor and a Designer. Design an interview format and questions for a specific Contracting Company to answer on the subject of novation. Design an interview format and questions following the results of the previous interview to issue a separate questionnaire to a different Contracting Company to analyse company differences. Analyse results gathered in the interview to form a conclusion about the effect of novation in construction. Make suggestions or recommendations to the industry and Clients within the construction industry. 1.6 Overview of Main Conclusions The Authors completed research shows that there are ten factors that could adversely affect the working relationship between a Contractor and a Designer under a novation agreement. The Author found through analysing an interview and questionnaires completed by two Contractors and an Architect that the reasons for novation having an adverse influence on the working relationship of a Contractor and Designer were that: The time allowed for Contractor to Tender is not increased The loyalty of Designer to Client remains evident after novation to the Contractor There is usually a large distance between the Designers head office and the project Insufficient design fees are allocated at the tender stage There is an increased risk of error in design There could have been a previously poor working relationship between the parties The Designer may be inappropriate for the project The performance of the Designer is not consistent throughout the process of completing the design Novation is usually late or rushed from the Client There is an increased probability of conflict between the two parties The Author found that many of these factors were specific problems which could be attributed to the process of novation under a design and build project. Therefore, the results support the hypothesis of the research. However, additional research is required if the hypothesis is to be proven to be correct. 1.7 Guide to the Report Chapter One: Introduction This section introduces the study and outlines the hypothesis, aim and objectives of the research. It indicates the origin of the Authors interest in the subject, why the hypothesis was chosen, and describes the methodology that was followed. Chapter Two: Literature Review This section examines the literature research conducted by the Author. It is an investigation into the definition of novation, and describes where it is used within the construction industry. This section details the current view of the contractor in a novation agreement. Chapter Three: Methodology This section of the report describes the methodology which was used to conduct this research. It shows how the information was collected. It also includes the topics covered within the interview and the design of questionnaires that were employed. Chapter Four: Design and Build Contracts This section describes the forms of J.C.T. contract used and highlights the advantages and disadvantages to the Design and Build form of JCT contract. It provides an introduction into Design and Build and details the differences between the Employers Requirements and Contractors Proposals that are a key feature of the Design and Build contract. Chapter Five: Novation This section of the report describes in detail the uses of novation within a construction context. It gives a definition to the process of novation as used in a Design and Build situation. This chapter details the conflict of interest the Contractor and the Designers tend to experience due to novation. It illustrates the problems that may arise in the design, payment of design fees and the varying levels of the Consultants performance. Chapter Six:Analysis This section of the report is the analysis of the questionnaires sent to Clients within the building industry and their Project Managers and the Designers. It analyses the interviews conducted with the contractors and additional information gathered. Chapter Seven: Conclusion This section of the report presents the Authors conclusions based upon the findings within the analysis chapter of the report. It suggests solutions to the aims and objectives set out in the introduction, criticises the hypothesis around the report was based and highlights the possibility for further research. Chapter 2 Literature Review 2.1 Introduction The literature review is a comprehensive analysis of all relevant articles, books and publications to this research project. Derek Swetnam[4] describes the literature review as a report; That is central to the dissertation and in all styles of work it has a number of functions: It shows that you have read widely around your chosen topic It demonstrates your critical understanding of the theory It acknowledges that work of others It informs and modifies your own research The Literature review in this chapter is broken down into eight sub-headings. The chapter talks about the description of novation, then goes on to describe where novation is used today both in and outside the construction industry. The literature review describes the process of a Designer being novated to a Contractor. The final section of this chapter discusses and analyses in what way the literature which is reviewed is relevant to the Authors research project. 2.1.1 General Aims To break down the causes of the problem highlighted in the hypothesis into logical stages. To collect and analyse previous research and literature to further investigate the subject area of this project. To research any previously made recommendations. Make recommendations which have been concluded from a detailed literature review. 2.2 Aim of This Literature Review What is the description of Novation and in what context was it used before in construction? Where is Novation used today outside of construction and what is its main purpose? What other uses are there of Novation within construction other than a Designer being novated to a Contractor? When did Novation of a Designer to Contractor become popular with Clients in the construction industry? Have there been problems with the novation of a Design team to a Contractor in the past? When is Novation practical in construction contracts? What are the risks to the Contractor in the novation process? 2.3 Contents of Literature Review 2.3.1 Description of Novation David Janssens[5] stated that: Occasionally, an Employer may stipulate that the successful Contractor is to engage one or more of the Employers consultants to complete the design and detailing of the project in the post-contract stage. Such consultants are employed by Contractors under novation agreements, i.e. a novation agreement is a new agreement in substitution of a previous agreement between the Consultant and the Employer. Novation exists when an agreement or contract between two parties is going to be broken and a third party enters to take the place the agreed or contract role of the party which is leaving the agreement or contract. Novation can also exist when a third party enters into an agreement or contract without any other party leaving. Jeremy Hackett[6] stated that: Novation is a legal concept, formally providing for the re-employment of a Consultant by the Contractor, as part of the contract agreement between the Employer and Contractor. Should the Contractor merely choose to re-employ the same individuals who have previously sat the other side of the interview table from himself that would not be novation, but its effect would be very similar. 2.3.2 Uses for Novation. Novation is not only used within the construction industry, the use of novation in law is much more commonly used in the buying and selling of manufacturing companies. In this context a novation agreement maybe drawn up by lawyers of a manufacturing company which intends to sell to buyer whilst still retaining the same business clientele. In this instance a customer of the business being sold would be novated across to the new buyer of the business, this ensures that the customer can always source what ever item the new buyer manufactures. Ann Arbor[7] Stated that: A hospital in Texas is taking electronic commerce beyond purchase orders and usage reports to adoption of digital contract management. The sooner hospitals are able to sign up to participate in new contracts, the sooner they are able to access contract pricing. Using the enhanced form management program, materials managers can submit forms online where suppliers can approve them, also online. In this example a hospital in Texas is using the agreement of novation over the internet to sign up for new contracts much faster than it was able to previously. This has benefited materials managers the most as they are able to source cheaper or higher quality materials from differing suppliers and simply transfer the agreement they have with one supplier to another using novation. 2.3.3 Alternative uses of Novation within construction. The section above discusses how different forms of novation are implemented in areas other than the construction industry. However, within the realms of construction there are many more uses for the novation agreement to be used. The use of novation within construction has only been commonly used during the past decade or so, the main reason for this is the introduction of the JCT Design and Build Contract which made the novation of Designer to the Contractor much easier for the Client. Before the introduction of Design and Build Contract novation was present in the same format it exists today in other industries as mentioned above. If during the construction process a Client was unable to fund any further necessary works and there was a willing buyer to stand in for the Client, it may be in the interest of the entering party to continue to use the existing Contractor. The easiest and least time consuming way to do this would be using the Novation agreement. The second way in which novation occurred in a construction context before the introduction of the Design and Build Contract was if the Contractor was suffering from financial issues or the relationship between himself and the Client has been irreparably affected in someway. If a situation like this occurred it was beneficial for the Client to take on board a new Contractor through a novation agreement. This removed the necessity for the remaining works to be re-tendered, and the likelihood that the Client would have to pay an excess for the works to be completed. 2.3.4 When did novation become popular with Clients Jim Smith[8] stated that: The choice of a procurement method is probably the single most important decision the client makes, other than the decision to build. The various procurement methods can be described, as defined by Masterman (2002), under these three distinct categories: Separated and co-operative. Integrated. Management orientated. In the last few years and particularly within the past decade the procurement methods for contractors have been moving away from the more traditional contracts as described above. The change to a procurement method which uses the second and third categories above has largely been Client-driven; the main reason for this is that the Contractor has to accept a high level of risk if he is to tender successfully for a project. As more design development has been shifted across to the Contractor it is becoming easier and more cost effective for the Client to shift higher levels of risk to the Contractors. The Design and Build contract and all its variations have expanded considerably to accommodate a Clients needs in recent times. The Royal Institution of Chartered Surveyors (RICS) [9] in 2000 stated that: Design and build and its variations have expanded considerably in the last decade. It has increased dramatically in the 1990s going from a 10 percent share during the 1980s up to a 35 percent share of the construction procurement market, with management contracting declining to a 10 percent share. Chan stated[10] that: 21% of private Clients in the UK use the Design and Build system, of which 42% commonly use Design-Novate and Construct for their projects. Design-Novate and Construct has also been widely adopted in Australia and Hong Kong. David Jaggar[11] Stated that: The major advantages of design and build are that all the risks, both financial and period for completion, are transferred to the design and build contractor, with the client only dealing with one organisation, so eliminating the complexities and frustrations of dealing with a range of separate organisations. The approach also overcomes the problem of the separation of design and construction, so saving overall time and allowing the design to reflect improved buildability in the construction solution. The argument against this is that a Contractor may be taking a higher percentage of higher risk projects. However, as a Client is off loading a lot more risk than what was traditionally not possible in the past they are able to fund much more projects and engage a lot more designers. The result of this is that the Contractor has more work to tender for and a much higher chance of winning projects as more tenders will be processed. 2.3.5 Issues arising from using Novation in construction. Jim Smith[12] stated that: There is considerable debate as to the merits and demerits of the approach and it is fair to say that many design professionals were unhappy about the approach, not least because there was a reduction in their own influence and independence. However, a valid view put forward, which undoubtedly design and build suffered from in the 1980s, was that the quality of the final building was often inferior and the role of design was devalued, as the design and build contractors shaped the design to suit their particular methods of construction. More recent views from clients noted above indicate that they were satisfied with the quality of their completed design build projects. The Design Manager of a Contracting Company plays a critical role in the development of design to determine a contract value for a project. The role involves being able to balance cost and quality and time constraints within a framework. This is an essential skill for all Design Managers or Project Co-ordinators. The Design Manager will work closely with the Commercial Manager at the tender stage of a Design and Build contract when novation of the Design team is being used by the Client. It is crucial that both managers work together to reduce the amount of design and financial risk the contractor will have to carry through the contract period if the tender submission is to be successful. Allinson[13] states that: The developments in the construction industry, the continuing specialisation of professions and the rising application of alternative procurement methods have all contributed to the gap between design and management, but they have also emphasised the need for a design professional with management and technological skills. The management of the process should ensure a successful and deliverable project When Design and Build contracts first became widely used by Clients in the 1990s Contractors tended to manage the building works in the same way they managed traditional contracts. Here a Project Manager was responsible for the development of the construction and concluding the outstanding design issues as well as resolving any building sites day-to-day issues. Project Managers were supported by a number of other managers such as Services Engineers, Site Management and Quantity Surveyors. Jim Smith[14] states that: However, a single reporting source on all aspects of design and cost has not always benefited the client, contractor or the project. Projects have been organised in a very flat structure with numerous lines of responsibility reporting directly to the project manager. The larger projects would have over half a dozen separate factions directly beneath the project manager, including the above stated managers, structure coordinators, documentation managers, tendering coordinators, contract administration, project administration and occupation health safety and rehabilitation (OHSR). In practice, this structure has proved to be an inefficient and ineffective form of management on many projects.

Awakening Essay -- essays research papers

When Kate Chopin's "The Awakening" was published at the end of the 19th Century, many reviewers took issue with what they perceived to be the author's defiance of Victorian proprieties, but it is this very defiance with which has been responsible for the revival in the interest of the novel today. This factor is borne out by Chopin's own words throughout her Preface -- where she indicates that women were not recipients of equal treatment. (Chopin, Preface ) Edna takes her own life at the book's end, not because of remorse over having committed adultery but because she can no longer struggle against the social conventions which deny her fulfillment as a person and as a woman. Like Kate Chopin herself, Edna is an artist and a woman of sensitivity who believes that her identity as a woman involves more than being a wife and mother. It is this very type of independent thinking which was viewed as heretical in a society which sought to deny women any meaningful participation. The fact that Edna is an artist is significant, insofar as it allows her to have a sensibility as developed as the author's. Furthermore, Edna is able to find in Mlle. Reisz, who has established herself as a musician, a role model who inspires her in her efforts at independence. Mlle. Reisz, in confiding to Edna that "You are the only one worth playing for," gives evidence of the common bond which the two of them feel as women whose sensibilities are significantly different from those of the common herd. The French heritage which Edna absorbed through her Creole upbringing allowed her, like Kate Chopin herself, to have knowledge or a way of life that represented a challenge to dominant Victorian conventions. In Creole society, women are dominated by men, but at least the freer attitude toward sexuality allows a woman opportunities for romance which are lacking in Anglo-Saxon culture. But sexual freedom is of little interest to Edna unless it can be used as a means of asserting her overall freedom as a human being. Learning to swim is thus important to her, because it allows her to have more control over the circumstances of her own life through the overcoming of the dread of water and the fear of death which it symbolizes. Again, the process through which Edna attains liberation and, in the author's words, begins to "do as she likes and to feel as she likes," is a gradual one. From stat... ...otagonist, or the heroine. She dares to rebel against prevailing society, and even the very title of the book, as named by Kate Chopin, "The Awakening" is analogous to danger. Is the truth then so dangerous and horrific that one risks suicide? And if so, is this applicable to everyone? Similarly I would ask the question, if this were to be the case, or if even not, why is that most of the population is not committing suicide? Surely they are living lives which they would not prefer, for example, most people according to polls would not report their job unless they had to and were paid for it. Most marriages end in divorce. Indeed, the degree and level of suffering and pain throughout the populace is almost unfathomable. Perhaps, Ms. Chopin was living out a vicarious reality through Edna in committing suicide...and perhaps, this may be the underlying reason for the great reception which this novel has enjoyed...as well as staying power. Similarly, it has also been appointed a kind of jewel of the vanguard of women's rights. Indeed, "The Awakening" is one novel which exemplifies the attempt -- even realization -- of American womanhood's escape from personal and domestic bondage.